| Broken part |
Symptom |
Repair |
| Power |
No power. |
Check the main switch and outlet. |
| Check the fuse outside. |
| Spray |
No spray working |
Check whether the solution is in the spray bottle. |
| If wind comes out from backside of spray, bore the nozzle with spray needle. |
| Less spray pressure |
Check the all connection parts of the spray. |
| Motor works but spray doesn’t work. |
If the unit has vent function, check the vent switch whether it turns on. Other
cases, contact service center. |
Spray doesn’t work but motor is
continuously working. |
Check the pulley and hose which are inside of the unit. |
| Unusual injection shape |
Bore the nozzle with spray needle. Or disassemble the spray and wash with
warm water. |
| Suction |
Motor works but suction doesn’t work |
Check the hose if it’s blocked. |
| Check if the hose is torn down. |
Less suction pressure and too much
noise |
Make sure whether the motor is installed as slant position and check the
suction bottle whether it is closed completely. |
| There’s stink when using suction |
Check the foreign matter inside of hose and the bottle if it’s opened. |
| Illumination |
Too much bright of light volume |
Change the lamp to lower watt. |
| No lighting, but the lamp is OK |
Check the power line. |
| Try to turn on/off the main switch. |
| Control Pad |
Not working operating button on the
UNIT table. |
Check the main power. |
| Make sure green-light-on of the main switch. |
